Lexmark MX81 series - Drawer Pick Roller Removal; Media Tray Front Cover Removal; Sensor (Pick Roll Position) Removal

Media tray front cover removal
1 Remove the media tray. See “Media tray assembly removal” on page 560.
2 Remove the two screws (A) securing the front tray cover.
3 Release the tabs (B) at the bottom, then remove the front tray cover.
Drawer pick roller removal
1 Remove the media tray. See “550-sheet media tray and drawer assembly removal” on page 560.
2 Move the rollers downward (1), then push the latches inward (2), and pull out the pick roller (3).
Sensor (pick roll position) removal
1 Remove the media tray. See “550-sheet media tray and drawer assembly removal” on page 560.
2 Remove the pick roller. See “Drawer pick roller removal ” on page 561.
3 Release the latches (A), then pull away the sensor.
7463
Repair information
561