• All models ship with Sleep Mode set to On.
Operating clearances
The following clearances must be maintained for proper ventilation and operation of the MX710/ MX810 Series MFPs
(including removing jobs from the exit tray, fully extending the paper input tray, and using the ADF):
1 Top 152.4 mm (6 in.)
2 Right 152.4 mm (6 in.)
3 Front 381 mm (15 in.)
4 Left 152.4 mm (6 in.)
5 Rear 152.4 mm (6 in.)
Additional clearance (especially from the front) will usually be needed to utilize the
multi-purpose feeder, clear misfeeds, lift the scanner lid, and to change toner and
imaging units.
Acoustics
All measurements are made in accordance with ISO 7779 and conform with ISO 9296.
Acoustic measurements
Status 1 Meter average sound pressure (dBA) Declared sound power level (Bels)
MS810
Idle (Standby mode) 32 4.8
Quiet mode 53 6.8
Simplex printing 53 6.8
Duplex printing 57 7.2
MS811
Idle (Standby mode) 32 4.7
Quiet mode 53 6.8
Simplex printing 58 7.3
Duplex printing 57 7.2
MS812
Idle (Standby mode) 32 4.7
Quiet mode 53 6.8
Simplex printing 58 7.3
Duplex printing 58 7.3
Measurements apply to 300 dpi, 600 dpi, and 1200 dpi printing.
7463
Appendix A: Printer specifications
760
To Next Page
Loading...
