6 Slide the front door to the left, and detach it from the machine.
Inner guide deflector removal
1 Remove the left cover. See “Left cover removal (MX71x)” on page 301.
2 Remove the controller board access shield. See “Controller board access shield removal” on page 388.
3 Remove the media tray. See “Media tray removal” on page 374.
4 Remove the MPF tray. See “MPF tray removal” on page 333.
5 Remove the front door. See “Front door removal” on page 316.
6 Remove the toner cartridge.
7 Remove the imaging unit.
8 Remove the MPF feeder lift plate. See “MPF feeder lift plate removal” on page 328.
9 Remove the media turn guide. See “Media turn guide removal” on page 325.
10 Remove the media vertical guide. See “Media vertical guide removal” on page 326.
11 Remove the duplex exit diverter. See “Duplex exit diverter removal” on page 314.
12 Gently press the mounting loops inward to free them from the bosses on the frame.
7463
Repair information
318
To Next Page
Loading...
