Media tray front cover removal
1 Remove the media tray. See “250/550-sheet media tray option removal” on page 521.
2 Remove the two screws (A) securing the front tray cover.
3 Release the tabs (B) at the bottom, then remove the front tray cover.
Drawer pick roller removal
1 Remove the media tray. See “250/550-sheet media tray option removal” on page 521.
2 Move the rollers downward (1), then push the latches inward (2), and pull out the pick roller (3).
Sensor (pick roll position) removal
1 Remove the media tray. See “250/550-sheet media tray option removal” on page 521.
2 Remove the pick roller. See “Drawer pick roller removal ” on page 522.
3 Release the latches (A), then pull away the sensor.
7463
Repair information
522
To Next Page
Loading...
