Lexmark MX81 series - 10-Inch Display Removal

• “Control panel front cover removal” on page 426
• “Control panel latch removal” on page 428
• “Control panel left bezel removal (MX71x)” on page 429
• “Control panel right bezel removal (MX71x)” on page 431
• “Left control panel hinge removal” on page 432
• “Right control panel hinge removal” on page 435
• “Tilting display removal (7‑inch and 10‑inch)” on page 438
• “Standard bin LED board removal” on page 440
• “Control panel cover removal” on page 441
• “Control panel buttons removal” on page 442
• “Control panel speaker removal” on page 443
• “USB cable removal” on page 444
10‑inch display removal
1 Remove the controller board access cover. See “Controller board access cover removal” on page 387.
2 Remove the rear door. See “Rear door removal” on page 307.
3 Remove the left cover. See “Left cover removal (MX81x)” on page 303.
4 Open the front door.
5 Open the cartridge door.
6 Remove the column left front cover. See “Column left front cover removal (MX81x)” on page 296.
7 Remove the flatbed scanner left cover. See “Flatbed scanner left cover removal topic” on page 505.
8 Remove the screw (A) securing the front scanner cover to the machine.
7463
Repair information
409