5 Remove the two screws (B), then remove the left tamper motor.
Tamper drive belt removal
1 Remove the left cover. See “Stapler/offset stacker left cover removal” on page 597.
2 Remove the right cover. See “Stapler right cover removal” on page 617.
3 Remove the top cover. See “Stapler/offset stacker top cover removal” on page 599.
4 Remove the tamper motor assembly engaged to the belt. See “Tamper motor (right) removal” on page 608 or
“Tamper motor (left) removal” on page 608.
7463
Repair information
609
To Next Page
Loading...
