• “Sensor (mailbox bin full receive) removal” on page 639
• “Mailbox belt removal” on page 642
• “Mailbox output bin LED assembly removal” on page 644
Mailbox assembly removal
Press the latches to release, and lift the mailbox assembly off the printer.
Mailbox top cover removal
Lift the top cover, and remove from the mailbox assembly.
Mailbox rear door removal
1 Open the rear door, and detach the string (A) from the door.
Note: Fasten the string end (B) to the rear side to prevent it from recoiling into the interior of the mailbox.
7463
Repair information
624
To Next Page
Loading...
