Warning—Potential Damage: Do not tap the cartridge on a hard surface. This could damage the cartridge.
7 Push the cartridge holder firmly back into the stapler unit until the cartridge holder clicks into place.
8 Close the stapler door.
9 To clear the message and continue printing, select Next > > Clear the jam, press OK > .
User attendance messages (0-99.99)
User attendance messages (0‑99.99)
User attendance messages
Error
code
Description Action
30.xx Toner cartridge missing Make sure all cartridges are installed properly.
31.21 Toner Level Sensing reading out of range See “Toner level sensing error check” on
page 103.
31.22 Excessive toner sensing line noise See “Toner level sensing error check” on
page 103.
31.23 Abrupt change detected in toner sensing reading See “Toner level sensing error check” on
page 103.
7463
Diagnostic information
98