Lexmark MX81 series - Page 99

Error
code
Description Action
31.25 Toner level sensing calibration capacitor reading too low See “Toner level sensing error check” on
page 103.
31.40 Toner cartridge smart chip error See “Toner cartridge smart chip error service
check” on page 103.
31.41 Toner cartridge I2C packet time-out See “Toner cartridge smart chip error service
check” on page 103.
31.42 Toner cartridge I2C packet has been sent but code timed-out on
receiving the data (callback)
See “Toner cartridge smart chip error service
check” on page 103.
31.43 Toner cartridge security error in the send challenge sequence See “Toner cartridge smart chip error service
check” on page 103.
31.44 Toner cartridge ROM signature error See “Toner cartridge smart chip error service
check” on page 103.
31.45 Toner cartridge stuck or busy; status register and/or CRI Arbiter
register report busy
See “Toner cartridge smart chip error service
check” on page 103.
31.60 Imaging unit smart chip error See “Imaging unit smart chip service check” on
page 104.
31.61 Imaging unit I2C packet time-out See “Imaging unit smart chip service check” on
page 104.
31.62 Imaging unit I2C packet has been sent, but code timed-out on
receiving the data (callback)
See “Imaging unit smart chip service check” on
page 104.
31.63 Imaging unit security error in the send challenge sequence See “Imaging unit smart chip service check” on
page 104.
31.64 Imaging unit ROM signature error See “Imaging unit smart chip service check” on
page 104.
31.65 Imaging unit stuck or busy; status register and/or CRI Arbiter
register report busy)
See “Imaging unit smart chip service check” on
page 104.
31.80 Fuser smart chip error See “Fuser unit smart chip service check” on
page 105.
31.81 Fuser I2C packet time-out See “Fuser unit smart chip service check” on
page 105.
31.82 Fuser I2C packet has been sent but code timed out on receiving
the data (callback)
See “Fuser unit smart chip service check” on
page 105.
31.83 Fuser security error in the send challenge sequence See “Fuser unit smart chip service check” on
page 105.
31.84 Fuser ROM signature error See “Fuser unit smart chip service check” on
page 105.
31.85 Fuser smart chip stuck or busy; status register and/or CRI Arbiter
register report busy)
See “Fuser unit smart chip service check” on
page 105.
32.10 Toner cartridge smart chip compatibility error Replace the toner cartridge.
32.11 Imaging unit smart chip compatibility error Replace the imaging unit.
7463
Diagnostic information
99