3 Remove the two screws (B) from the top side of the cover.
4 Remove the right cover.
HCIT controller PCBA removal
1 Remove the drawer assembly rear cover. See “HCIT drawer assembly rear cover removal” on page 580.
2 Remove the drawer assembly left cover. See “HCIT drawer assembly left cover removal” on page 580.
3 Disconnect all the cables (J3, J5, J11, J10, J9, J8, J7 and J1) from the controller PCBA, then remove the two screws
(A).
7463
Repair information
582
To Next Page
Loading...
