Lexmark MX81 series User Manual

Installation note: When replacing the left cover, ensure that the charcoal filter is properly installed.
Left cover removal (MX81x)
1 Remove the controller board access cover. See “Controller board access cover removal” on page 387.
2 Remove the rear door. See “Rear door removal” on page 307.
3 Open the front door.
4 Pull the media tray from the machine.
5 Remove the four screws (A) securing the left cover to the machine.
7463
Repair information
303

Lexmark MX81 series Specifications

General

Brand	Lexmark
Model	MX81 series
Category	All in One Printer
Language	English