Actions Yes No
Step 4
Check the following fuser components for wear or damage:
• Gears
• Exit rollers
• Heat belt or hot roller
Are they free of damage?
Go to step 5. Replace the fuser. See
“Fuser removal” on
page 347.
Step 5
Reseat the connections on the LVPS.
Does the problem remain?
Replace the LVPS. See
“LVPS removal” on
page 403.
Problem solved.
Skewed print
ABCDE
ABCDE
ABCDE
Actions Yes No
Step 1
a Perform a print test:
Diagnostics menu > PRINT TESTS > Tray 1
b Adjust the margins if necessary:
Diagnostics menu > REGISTRATION
Does the error remain?
Go to step 2. The problem is solved.
Step 2
a Check the media source.
b If the media is from tray 1, go to step 3.
If the media is from the MPF, go to step 5.
Step 3
Make sure the pick roller tires are free of debris. Check for wear or
damage.
Are they free of wear or damage?
Go to step 4. Replace the pick roller.
See “Pick roller
assembly removal” on
page 377.
7463
Diagnostic information
44
To Next Page
Loading...
