Parts catalog
• “Legend” on page 673
• “Assembly 1: Covers (MX71x)” on page 675
• “Assembly 2: Covers (MX81x)” on page 677
• “Assembly 3: Paper path” on page 681
• “Assembly 4: Fusers” on page 683
• “Assembly 5: Electronics” on page 685
• “Assembly 6: Drive motors” on page 689
• “Assembly 7: Duplex” on page 691
• “Assembly 8: Frame” on page 693
• “Assembly 9: Control panel (MX71x)” on page 695
• “Assembly 10: Control panel 10‑inch display (MX81x)” on page 699
• “Assembly 11: Paper tray” on page 701
• “Assembly 12: ADF assembly” on page 703
• “Assembly 13: ADF covers” on page 705
• “Assembly 14: ADF mechanical” on page 709
• “Assembly 15: ADF electronics” on page 711
• “Assembly 16: Flatbed scanner (MX710 and MX711)” on page 715
• “Assembly 17: Flatbed scanner (MX810, MX811 and MX812)” on page 719
• “Assembly 18: Input options (MX710 and MX711)” on page 723
• “Assembly 19: Input options (MX810, MX811 and MX812)” on page 725
• “Assembly 20: 250-sheet tray option (MX710 and MX711)” on page 727
• “Assembly 21: 550-sheet tray option (MX710 and MX711)” on page 729
• “Assembly 22: 550-sheet tray option (MX810, MX811, MX812)” on page 731
• “Assembly 23: High capacity input tray option 1 (MX710 and MX711)” on page 733
• “Assembly 24: High capacity input tray option 2 (MX710 and MX711)” on page 735
• “Assembly 25: High capacity input tray option 3 (MX810, MX811, MX812)” on page 737
• “Assembly 26: High capacity input tray option 4 (MX810, MX811, MX812)” on page 739
• “Assembly 27: Output options (MX810, MX811, and MX812)” on page 741
• “Assembly 28: Staple finisher option 1” on page 743
• “Assembly 29: Staple finisher option 2” on page 745
• “Assembly 30: Mailbox option 1” on page 747
• “Assembly 31: Mailbox option 2” on page 749
• “Assembly 32: Offset stacker option 1” on page 751
• “Assembly 33: Offset stacker option 2” on page 753
• “Assembly 34: Miscellaneous” on page 755
• “Assembly 35: Power cords” on page 757
7463
Parts catalog
672
To Next Page
Loading...
Need help?
General
