Lexmark MX81 series - Configuration Menu

Configuration menu
• “Entering configuration mode” on page 252
• “Roller Kit Counter Value” on page 252
• “Reset Roller Kit Counter” on page 252
• “Reset Separator Roll and Pick Assembly Counter” on page 252
• “USB Scan to Local” on page 253
• “Print Quality Pages” on page 253
• “Reports” on page 253
• “Size sensing” on page 254
• “Panel Menus” on page 254
• “PPDS Emulation” on page 254
• “Download Emuls” on page 255
• “Safe Mode” on page 255
• “Factory Defaults” on page 255
• “Energy Conserve” on page 255
• “Min copy memory” on page 256
• “Fax low power support” on page 256
• “Num pad job assist” on page 256
• “Format fax storage” on page 256
• “ADF edge erase” on page 257
• “Scanner manual registration” on page 257
• “Disable scanner” on page 258
• “Paper Prompts” on page 258
• “Envelope Prompts” on page 259
• “Action for Prompts” on page 259
• “Jobs on Disk” on page 260
• “Disk Encryption” on page 260
• “Erase All Information on Disk” on page 260
• “Wipe All Settings” on page 261
• “Font Sharpening” on page 261
• “A4 Fuser” on page 261
• “Require Standby” on page 261
• “A5 Loading” on page 262
• “UI Automation” on page 262
• “LES Applications” on page 262
• “Key Repeat Initial Delay” on page 263
• “Key Repeat Rate” on page 263
• “Clear Supply Usage History” on page 263
• “Clear Custom Status” on page 263
7463
Service menus
251