• HCIT jam service check
• ADF skew adjustment (front side)
• ADF skew adjustment (back side)
• ADF assembly removal
• ADF front side drive parts pack removal
• ADF left hinge removal
• ADF pick roller removal
• ADF right hinge removal
• Control panel front cover removal
• Interrupt with flag sensor (ADF 2nd scan) removal
• Interrupt with flag sensor (ADF media exit) removal
• Flatbed scanner assembly removal
• Laser printhead removal
• Assembly 2: Covers (MX81x)
• Assembly 8:Frame Assembly
• Assembly 9: Control panel (MX71x)
• Assembly 10: Control panel 10inch display (MX81x)
• Assembly 11: Paper tray
• Assembly 15:ADF electronics
• Assembly 16:Flatbed scanner (MX710 and MX711)
• Assembly 17:Flatbed scanner (MX810, MX811 and MX812)
• Assembly 20: 250-sheet tray option (MX710 and MX711)
• Assembly 21: 550-sheet tray option (MX710 and MX711)
• Assembly 22: 550-sheet tray option (MX810, MX811, MX812)
• Assembly 24: High capacity input tray option 3 (MX810, MX811, MX812)
• Assembly 34: Miscellaneous
Added the following topics:
• Duplex removal (MX71x)
• Duplex removal (MX81x)
• Media size actuator removal
• Sensor (ADF elevator tray home position) removal
• Sensor (ADF lower door interlock) removal
• Sensor (ADF top door interlock) removal
• Sensor (ADF gap detect) removal
• Upper redrive motor removal
• Assembly 7: Duplex in parts catalog
7463
Preface
28
To Next Page
Loading...
