Lexmark MX81 series - Page 293

5 Measure L1, L2, T1, T2, R1, R2, B1, and B2 data points as shown in the following image.
6 Determine the following calculations:
• L2-L1 = ___
• R2-R1 = ___
• T2-T1 = ___
• B2-B1 = ___
7 Determine whether the printer passes or fails the skew specifications based on the values listed in the following
table:
Skew specifications
(L2-L1) (R2-R1) (T2-T1) (B2-B1)
Letter Less than or equal to 1.4
mm
Less than or equal to 1.4
mm
Less than or equal to 1 mm Less than or equal to 1 mm
A4 Less than or equal to 1.5
mm
Less than or equal to 1.5
mm
Legal Less than or equal to 1.8
mm
Less than or equal to 1.8
mm
7463
Repair information
293