5 Remove the toner cartridge.
6 Remove the imaging unit.
7 Remove the MPF feeder lift plate. See “MPF feeder lift plate removal” on page 328.
8 Remove the media turn guide. See “Media turn guide removal” on page 325.
9 Remove the media vertical guide. See “Media vertical guide removal” on page 326.
10 Remove the duplex exit diverter. See “Duplex exit diverter removal” on page 314.
11 Remove the inner guide deflector. See “Inner guide deflector removal” on page 318.
12 Remove the media aligner roller. See “Media aligner roller removal” on page 323.
13 Remove the screw (A) securing the sensor (toner density) to the machine.
14 Gently lift and remove the sensor (toner density).
7463
Repair information
337
To Next Page
Loading...
