8 Insert the cartridge into the printer, and then push the green handle back into place.
Notes:
• Align the arrows on the guides of the toner cartridge with the arrows in the printer.
• Make sure the cartridge is fully pushed in.
9 Close the multipurpose feeder door and the front cover.
10 To clear the message and continue printing, select Next > > Clear the jam, press OK > .
200‑201 paper jams
Error code Description Action
200.01 Media remains on the sensor (input) during
the warm‑up sequence.
See “Sensor (input) static jam service check” on page 58.
200.02 Media reached the sensor (input) sooner
than the specified time. The wrong config ID
causes the engine to assume a 550 paper
path on a 250 model.
See “Sensor (input) early arriving jam service check” on
page 58.
7463
Diagnostic information
56
To Next Page
Loading...
