Lexmark MX81 series - Page 728

Assembly 20: 250-sheet tray option (MX710 and MX711)
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8160 1 1 250-sheet tray option upper interface cable “Drawer upper interface
cable removal” on page
526
2 40X8156 1 1 Sensor (pass through) “Sensor (drawer pass
through) removal ” on
page 531
3 40X8158 1 1 Sensor (pick) “Sensor (pick) removal” on
page 533
4 40X7592 1 1 Sensor (pick roller position) “Sensor (pick roll position)
removal ” on page 522
5 40X7593 1 1 Pick roller “Drawer pick roller
removal ” on page 522
6 40X8159 1 1 250-sheet tray option lower interface cable “Drawer lower interface
cable removal” on page
527
7 40X7713 1 1 Separator roller assembly “Media tray separation
roller removal” on page
521
8 40X8154 1 1 250-sheet tray front cover “Media tray front cover
removal” on page 522
9 40X8541 4 1 Media size actuator “Media size actuator
removal” on page 375
10 40X8153 1 1 250-sheet tray “Media tray assembly
removal” on page 521
11 40X8157 1 1 250-sheet tray option transport motor “Drawer transport motor
removal” on page 530
12 40X7591 1 1 Media feeder “Drawer media feeder
removal ” on page 528
13 40X8672 1 1 250-sheet tray option controller PCBA “Drawer controller PCBA
removal” on page 525
7463
Parts catalog
728