June 28, 2016
• Updated the ”LES Applications” topic in the “Service menus” chapter.
June 20, 2016
• Removed 40X7003 in the “Universal trays and accessories” topic in the “Parts catalog” chapter.
January 8, 2016
• Changed the part number of the input sensor from 40X4368 to 40X8673.
December 16, 2015
• Corrected graphic in the “Oscillating printhead assembly electronic adjustment” topic of the ”Adjustments”
group of the “Repair information” chapter.
November 9, 2015
• Changed 40X4417 to 41X4417 in the “Covers” topic in the “Parts catalog” chapter.
October 20, 2015
• Created this new intervention‑required message, “81 Routine Maintenance” on page 179.
• Updated “User attendance messages (0‑99)” on page 180 to include an entry for 81 Routine
Maintenance.
• Created “Replace fuser service check” on page 194.
• Updated “Individual maintenance part expected life” on page 455 to change the part number for the
charge roll assembly with tool from 40X5852 to 40X0127.
August 21, 2015
• Updated a number of service check topic for 201 and 202 error messages in the Diagnostic information
chapter.
March 31, 2015
• Updated assembly 2 in the Parts catalog chapter—Added 41X0792.
January 27, 2015
• Updated the Solid black service check in the Diagnostic information chapter.
January 9, 2015
• Removed the 202.30 error code entry from the Error code table in the Diagnostic information chapter.
• Updated the Solid black service check in the Diagnostic information chapter.
December 5, 2014
• Parts catalog Assembly 11—Replaced part number 40X4469 with 40X5786.
November 26, 2014
• Updated the graphic in the Assembly 7 parts catalog in the Parts catalog chapter.
4062
Preface
26
To Next Page
Loading...
