September 29, 2014
• Updated the Assembly 7 parts catalog art in the Parts catalog chapter.
July 2, 2014
• Added staple cartridge holder (40X7466) to parts catalog assembly 14.
November 11, 2013
• Deleted all instances of 40X5057.
July 30, 2013
• Updated description of 40X5954.
• Added 40X2859.
March 21, 2013
• Corrected the description of PN 40X1889.
December 5, 2012
• Added PN 40X5976 to the Printhead, charge, and transfer parts catalog assembly (Assembly 6).
September 27, 2012
Corrected the cross references in the following removal procedures:
• Step 1 of “Alignment assembly removal” on page 271.
• Step 1 of “T650 rear connection bezel assembly removal” on page 324.
• Step 1 of “T650 rear lower cover assembly removal” on page 326.
• Step 3 of “Laser cover removal” on page 289.
June 6, 2012
• Changed 40X4356 description to Duplex cooling fan, two wire.
• Changed 40X4359 description to Print cartridge cooling fan, three wire.
February 2, 2012
• Added PN 40X6932 for the tray size sensing actuators in the following assemblies:
– “Pick arm assembly, trays, and MPF” on page 476
– “250-sheet option tray assembly” on page 483
– “550-sheet option tray assembly” on page 485
• Added United Kingdom in the description for PN 40X0271 under “Power cords” on page 511.
.
January 13, 2012
• Corrected all cross-references when removing or replacing the pick arm assembly.
December 5, 2011
• Updated the description for PN 40X4384 to go to “Media path and ducts” on page 471.
4062
Preface
27
To Next Page
