CAB DISPLAY MODULE (CDM)
4.2 Cab Display Options
The display and sound features of the cab display module (CDM) can be adjusted to suit each particular Operator.
NOTE:
The procedures listed in this section are current for c ab display module (CDM) software version C315 (for
the M105 and M205) or C500 (for the M155) and windrower control module (WCM) X109 (for the M205)
or M221 (for the M155). The WCM is supplied preloaded with the latest released version of the operating
software. Any subsequent updates will be made available via internet download from the MacDon Dealer Portal
(https://portal.macdon.com).
NOTE:
Screens may appear differently if running newer or older versions of software, and not all features are available
on every machine.
147962 156 Revision A
To Next Page
Loading...
