CAB DISPLAY MODULE (CDM)
4.5.8 Activat
ing the Header Tilt Control Lockout
NOTE:
• The header MUST be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header.
• This procedure requires installa tion of the optional Hyd ra ulic Center-Link (MD # B 4 650) a nd option al Aux iliary
Valve (MD #B5269).
• Displaying center-link position on cab display module (CDM) requires installation of the optional Expansion
Module (MD #B4666). For more information, refer to the windrower operator’s manual or the windrower
technical manual.
147962 245 Revision A
To Next Page
Loading...
