ASSEMBLING THE W INDROWER
3.15 Starting Engine
1. Ensure there is sufficient fuel for a 15 m inute run.
2. Ensure lock (A) is engaged at the cab-forward or
engine-forward position.
Figure 3.1
28: Operator Console
3. Move the ground speed lever (GS L) (A) into the
N-DETENT position.
4. Turn the steering wheel until it locks.
5. Push header drive s witch (B) to the OFF position.
CAUTION
Check to be sure a ll bystanders have cleared t he area.
Figure 3.129: M155/M205 Operator Console
Figure 3.130: M105 Operator Console
147962 84 Revision A
To Next Page
Loading...
