PERFORMING PREDELIVERY CHECKS
5.13 Performing Final Steps
1. Remove plastic covering from c ab display module (CDM), and seats after predelivery checks are complete.
2. Locate bag inside the cab containing the GPS mount kit, and install kit in accordance with the instructions in the
kit. If no t insta lling kit, label bag (GPS Completion kit) and p lace kit in toolbox for safekeeping.
3. Remove decal (MD #166705) from windshield only
AFTER machine is delivered to the end user.
Figure
5.55: Windshield Decal (MD #166705)
147962 356 Revision A
To Next Page
Loading...
