CAB DISPLAY MODULE (CDM)
4.6 Displaying Activated Cab Display Lockouts
Displaying the activated control locks allows you to quickly determine which controls are locked on the cab
display module (CDM).
NOTE:
• Displaying auger and reel speed control locks requires installation of the optional Expansion Module
(MD #B4666). For more information, refer to the windrower operator’s manual or the windrower technical
manual.
• Displaying reel fore-aft control lock requires installation of the optional windrower Hydraulic Fore-Aft kit
(MD #B5577). For more information, refer to the windrower operator’s manual or the windrower technical
manual.
• Displaying header tilt control lock requires installation of the optional Hydraulic Center-Link (MD #B4650) and
optional A u x ilia ry Va lve (MD #B52 69 ) .
147962 249 Revision A
To Next Page
Loading...
