CAB DISPLAY MODULE (CDM)
4.5.7 Activat
ing the Reel Fore-Aft Control Lockout
NOTE:
• This procedure is for draper headers only.
• The header MUST be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header.
• The Reel Fore-Aft option requires installation of the optional Windrower Hydraulic Fore-Aft Kit (MD #B5577).
For more information, refer to the windrower operator ’s manual or the windrower technical manual.
147962
24
1
Revision A
To Next Page
Loading...
