UNLOADING THE WINDR OW ER
2.3 Removing Wheel and Step Assembly
1. Remove shipping wire (A) and bolt securing the
hose support to the shipping frame, and remove the
hose support.
2. Lay hose support off to the side.
Figure 2.8: Shipping Frame
3. Remo ve two 3/4 x 16.5 in. bolts (A) (one per side) from
the front frame beam. Retain for reinstallation.
Figure 2.9: Front Frame Beam
147962
12
Revision A
To Next Page
Loading...
