CAB DISPLAY MODULE (CDM)
4.2.3 Adjusti
ngtheCabDisplayBuzzerVolume
1. Turn ignition key to RUN, or start the engine .
2. Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
• WINDROWER SETUP? is displayed on the
upper line.
• NO/YES is dis playe d on the lower lin e .
Figure 4.21: M105 CDM Programming Buttons
Figure 4.22: M155 CDM Programming Buttons
Figure 4.23: M205 CDM Programming Buttons
147962 163 Revision A
To Next Page
Loading...
