CAB DISPLAY MODULE (CDM)
5. Press SELECT (D) until DISPLAY CONTRAST is
displayed on the upper line.
• Default setting is displayed on the low er lin e.
6. Press left (B) or right (C) arrows to adjust
display contrast.
7. Press PROGRAM (A) to ex it Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
Figure 4.4
5: M105 Display Contrast
Figure
4.46: M155 Display Contrast
Figure 4.47: M205 Display C ontrast
147962
17
1
Revision A
To Next Page
Loading...
