ASSEMBLING THE WINDROWER
1. Attac h chains or cables to t he four lifting points (A) on
the lift sling (MD #163871), and connect the loop ends
to the crane hook.
IMPORTAN T:
Use ca ble s or chain s with a minimum lifting
capacity of 3221 kg (7100 lb.).
2. Attach the lift sling to the four designated lifting points
on the windrower shipping frame as s hown.
Figure 3
.4: Shipping Frame Lifting Points
DANGER
To avoid injury or death from a swinging or
falling load, keep all bystanders clear when lifting.
Equipment used for lifting must exceed the maximum
requirements spe cified in this section.
3. Lift the windrower onto the support stand (A).
4. Remove chains from shipping frame and move lift
sling (B) clear of the work area.
Figure 3.5: Windrower on Support Stand
147962 29 Revision A
To Next Page
Loading...
