Maxim Integrated MAX32660 - Table 12-7: I C Interrupt Enable 0 Registers

MAX32660 User Guide
Maxim Integrated Page 150 of 195
Table 12-7: I
2
C Interrupt Enable 0 Registers
I
2
C Interrupt Enable 0 Register
I2Cn_INTEN0
[0x000C]
Bits
Name
Access
Reset
Description
31:16
-
R/W
0
Reserved for Future Use
Do not modify this field.
15
txloie
R/W
0
TX FIFO Locked Out Interrupt Enable
Set this field to enable events for TX FIFO lock events.
0: Interrupt disabled.
1: Interrupt enabled.
14
stoperie
R/W
0
Out of Sequence STOP condition detected Interrupt Enable
Set this field to enable events for an out of sequence STOP condition event.
0: Interrupt disabled.
1: Interrupt enabled.
13
strterie
R/W
0
Out of Sequence START condition detected Interrupt Enable
Set this field to enable events for an out of sequence START condition event.
0: Interrupt disabled.
1: Interrupt enabled.
12
dnrerie
R/W
0
Slave Mode Do Not Respond Interrupt Enable
Set this field to enable events in Slave Mode when the Do Not Respond condition
occurs.
0: Interrupt disabled.
1: Interrupt enabled.
11
daterie
R/W
0
Master Mode Received Data NACK from Slave Interrupt Enable
Set this field to enable events for Master Mode external device data NACK events.
0: Interrupt disabled.
1: Interrupt enabled.
10
adrerie
R/W
0
Master Mode Received Address NACK from Slave Interrupt Enable
Set this field to enable events for Master Mode slave device address NACK events.
0: Interrupt disabled.
1: Interrupt enabled.
9
toerie
R/W
0
Timeout Error Interrupt Enable
Set this field to enable events for a timeout error interrupt event.
0: Interrupt disabled.
1: Interrupt enabled.
8
arberie
R/W
0
Master Mode Arbitration Lost Interrupt Enable
Set this field to enable events in Master Mode for arbitration lost events.
0: Interrupt disabled.
1: Interrupt enabled.
7
adrackie
R/W
0
Received Address ACK from Slave Interrupt Enable
Set this field to enable events for Master Mode slave device address ACK events.
0: Interrupt disabled.
1: Interrupt enabled.
6
stopie
R/W
0
STOP Condition Detected Interrupt Enable
Set this field to enable interrupt events for STOP conditions.
0: Interrupt disabled.
1: Interrupt enabled.
5
txthie
R/W
0
TX FIFO Threshold Level Interrupt Enable
Set this field to enable interrupt events when a TX FIFO threshold event occurs.
0: Interrupt disabled.
1: Interrupt enabled.