EasyManua.ls Logo

Metrohm 900 - Metrohm Control Instruments

Metrohm 900
553 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
■■■■■■■■■■■■■■■■■■■■■■
11 Device manager
900 Touch Control
■■■■■■■■
87
Default gateway
IP address for the standard gateway. A gateway sets up connections to
several networks. It is located in the same subnet as the device to be con-
figured.
Entry x.x.x.x
Default value 192.168.10.10
MAC address
Unambiguous address of the network adaptor for identification within a
network. This parameter cannot be edited.
NetBIOS name
Unambiguous designation of the device within the network. This parame-
ter cannot be edited.
11.4 Metrohm control instruments
The following Metrohm devices can be used as control instruments:
Titrandos
Sample Processors
846 Dosing Interface
867 pH Module
856 Conductivity Module
The following specifications apply for all of the control instruments men-
tioned above.
Additional device configurations for the Sample Processor are described in
a separate chapter (see chapter 11.5, page 92).
The dialog shows the control instrument with its measuring inputs, the
MSB connectors and connected peripheral devices (dosing device, stirrer,

Table of Contents

Related product manuals