￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Manual control
900 Touch Control
￭￭￭￭￭￭￭￭
267
28.5.1 Parameter description
Memory
Memory location the method is loaded from. All memory locations are
selectable, even if they are currently not accessible.
Selection Internal memory | External memory 1 | Exter-
nal memory 2 | Shared memory
Default value Internal memory
Shared memory
Shared directory in the network.
File name
Selection of the method.
Selection Selection of stored methods
28.6 Remote
Manual control ▶ Remote
With the function [Remote], you can define manual output signals to the
remote interface of a connected Remote Box. It is not possible to define
input signals; the current status of the input lines is, however, displayed.
Inputs
Current status of the input lines.
Outputs
Selection of the signal out of the templates or entering the required bit
pattern. Templates are defined under System ▶ Templates ▶ Output
lines.
To Next Page
Loading...
