Metrohm 900 - Properties - Peripheral Devices

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
900 Touch Control
￭￭￭￭￭￭￭￭
91
Switch on
on | off (Default value: on)
If this parameter is activated, then you will be requested to prepare the
dosing device when the Touch Control is switched on.
Attach an exchange or dosing unit
on | off (Default value: on)
If this parameter is activated, then you will be requested to prepare the
dosing device when the exchange/dosing unit is attached.
Time interval
on | off (Default value: off)
Activate this parameter if you wish to receive a regular request to prepare
the dosing unit.
Input range 0.1 to 999.9 h
Default value 12.0 h
11.4.4 Properties – Peripheral devices
Instrument list: Control instrument ▶ Edit ▶ Peripheral
device ▶ Properties
The following data is displayed for the connected dosing devices and stir-
rers:
￭ Type
The display includes the device number, e.g. "800" (Dosino) or "804"
(Ti Stand)
￭ Serial number
In the case of the 700 Dosino and the 685 Dosimat, the serial number
cannot be read out.