Metrohm 900 - Details

24.1 More determination data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
216
￭￭￭￭￭￭￭￭
900 Touch Control
[Local com. var.]
(available only with loaded determinations)
Display the list of the common variables defined at the time of the deter-
mination (see chapter 24.3, page 219).
[Messages]
Display list with all of the messages which occurred during the determina-
tion (see chapter 24.2, page 218).
[View data]
Display all of the details for the selected command.
24.1.1 Details
Results dialog: More data ▶ View data
All of the variables generated by the determination are listed in the More
determination data / View data dialog. These can be used in calcula-
tions.
[Calibration data]
(available only with loaded determinations)
Display calibration data of the sensor used which was valid at the time of
the determination (see "Calibration and titrant data", page 218).
[Titrant data]
(available only with loaded determinations)
Display titrant data which was valid at the time of the determination (see
"Calibration and titrant data", page 218).
[Endpoint details]
Display details for each endpoint found (see "Endpoint details", page
217).