￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 System settings
900 Touch Control
￭￭￭￭￭￭￭￭
37
Forgotten password
CAUTION
If a user has forgotten his password, a new user name must be defined.
The same user name can only be used again after a re-installation and
re-creating the user list.
Proceed as follows:
1
Create a backup
Create a backup (see chapter 12.3, page 127).
2
Executing a system initialization
Switch off the Touch Control and execute a system initialization (see
chapter 30.1, page 483).
3
Restore backed-up data
Use the function Restore to reload the data from the backup into
your system (see chapter 12.3.1, page 127).
Deactivate the options User list and System settings / User
admin..
4
Switch on the Touch Control
Switch the Touch Control back on again after a few seconds.
5
Restore the user list
Create the user list again and redefine the login options.
7.3.5 Modification options
Main dialog: System ▶ System settings ▶ User admin. ▶ Login
options ▶ Modific. options
In the dialog Login options / Modification options, you can define for
which actions a reason must be entered. These reasons are documented
in the Audit Trail (see chapter 7.3.7, page 39) together with the modifi-
cation. The reason for the last modification is shown in the properties of
the method or determination.
To Next Page
Loading...
