Metrohm 900 - Editing Common Variables

14.1 Editing common variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
142
￭￭￭￭￭￭￭￭
900 Touch Control
14.1 Editing common variables
List of common variables: Common Variable ▶ Edit
The common variables can be modified as follows:
￭ Edit manually, see the following.
￭ Automatic assignment from the determination run. A calculation result
must be configured accordingly for this purpose (see chapter 14.4,
page 145).
Name
Designation of the common variable.
Entry 24 characters maximum
Default value empty
Value
Value of the common variable.
Input range –999999999 to 9999999999
Default value empty
Unit of the common variable.
Entry 10 characters maximum
Default value empty
Selection % | mol/L | mmol/L | g/L | mg/L | mg/mL |
mg/100 g | ppm | g | mg | µg | mL | µL | mg/
piece | °C | µg/min | mL/min | µL/min
Default value %