￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
250
￭￭￭￭￭￭￭￭
900 Touch Control
28 Manual control
The following functions are available in the manual control:
[Measure]
Carrying out manual measurements (see chapter 28.2, page 252).
Measuring modes:
￭ pH (potentiometric pH measurement)
￭ U (potentiometric voltage measurement)
￭ Ipol (voltametric measurement with selectable polarization current)
￭ Upol (amperometric measurement with selectable polarization voltage)
￭ T (temperature measurement)
￭ Conc (concentration measurement)
￭ Cond (conductivity measurement)
[Dosing]
NOTICE
Only active if a Dosino or dosing unit is connected.
Manual dosing (see chapter 28.3, page 256).
The following dosing functions are available:
￭ Preparing the exchange unit or dosing unit
￭ Emptying the dosing unit
￭ Filling the dosing cylinder of the exchange unit/dosing unit
￭ Dosing a specified volume
￭ Dosing continuously
To Next Page
Loading...
