29.13 Calculations
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
418
￭￭￭￭￭￭￭￭
900 Touch Control
Input range 0 to 999999 s
Default value 999999 s
29.13 Calculations
The following calculation commands are available:
CALC Defining calculations of a determination.
CALC LIVE Defining the calculation whose result will be dis-
played in the live display (so-called live result)
during a titration or measurement.
29.13.1 Calculations (CALC)
Calculations are defined with the command CALC. A method may contain
a maximum of nine calculation commands. A maximum of nine calcula-
tions can be defined per command. A series of variables (raw data from
the determination, previously calculated results, etc.) is available for the
calculations.
The command contains the following options, among others:
￭ Save result as titer
￭ Save result as common variable
￭ Save result in result table
￭ Define result limits
The result name is specified in the list for each calculation.
[New]
Define a new calculation or load an existing template, see following chap-
ter.
[Delete]
Delete the selected calculation from the list.
To Next Page
Loading...
