￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Printing
900 Touch Control
￭￭￭￭￭￭￭￭
247
Report Contents
Statistics overview # Detailed statistical overview. The sample data and all indi-
vidual results are printed out for each determination. The
number of determinations, the mean value, and the abso-
lute and relative standard deviations are printed out for
each result.
PC/LIMS
PC/LIMS report Machine-readable report with all of the important data for
a determination. This report can be saved as a TXT or
UTF-8 file or sent to a terminal program or a LIMS via an
RS-232 interface. The definition is carried out in the device
manager (see chapter 11.3.2, page 83).
Sample data
Current sample data Sample data of the current determination, context-sensi-
tive only from the main dialog.
Sample table List of all determinations in the sample table with the
respective sample data, as entered in the sample table.
Result table
Result table List of all determinations in the result table with results and
with the determination data, as saved in the result table.
More reports ▶ Method reports
Method sequence Method properties and the list of all method commands.
Parameters full Method properties and options, all method commands
with all parameters.
All parameters which no longer have their default settings
will be printed in bold. All parameters which have been
modified in comparison to the stored version of the
method are indicated by an *.
Titration & measuring
param.
Method properties; titration, measurement and calibration
commands with all parameters.
All parameters which no longer have their default settings
will be printed in bold. All parameters which have been
modified in comparison to the stored version of the
method are indicated by an *.
Modified parameters Method properties, all method parameters which have
been modified in comparison to the stored version of the
method.
To Next Page
Loading...
