Metrohm 900 - Page 66

8.4 Dosing unit
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50
￭￭￭￭￭￭￭￭
900 Touch Control
Length
Length of the tubing.
Input range 0.0 to 999.9 cm
Default value 0.0 cm
The setting 0.0 means that this tubing will neither
be rinsed nor emptied.
Diameter
Diameter of the tubing.
Input range 0.0 to 9.9 mm
Default value 2.0 mm
Fill port
Port
Port to be used as fill port for the PREP and EMPTY functions (see figure
8, page 51).
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 2
Length
Length of the tubing.
Input range 0.0 to 999.9 cm
Default value 25.0 cm
The setting 0.0 means that this tubing will neither
be rinsed nor emptied.
Diameter
Diameter of the tubing.
Input range 0.0 to 9.9 mm
Default value 2.0 mm
Special port
Port
Port to be used as special port for the PREP and EMPTY functions (see
figure 8, page 51).
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 4
Length
Length of the tubing.