￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Reagents
900 Touch Control
￭￭￭￭￭￭￭￭
63
If one of the following values is reached, then the reagent must be
replaced. The values are checked in the following cases:
￭ at the start of the determination.
￭ at the end of the determination.
Number of determ.
The number of determinations to be carried out with a certain amount of
reagent depends on the type of sample and its amount.
Input range 1 to 999
Selection off
Default value off
Working life
Working life of the reagent.
Input range 1 to 999 days
Selection off
Default value off
Volume
This parameter is only visible for volumetric reagents.
Volume of titrant dosed.
Input range 1.0 to 999.9 mL
Selection off
Default value off
Reagent capacity
This parameter is only visible with coulometric reagents.
Water capacity of the reagent.
Input range 1 to 9999 mg
To Next Page
Loading...
