Using the profiles
The IP Notify profiles defined in this dialog can be used in Setup Menu > Messag-
ing and Messaging 2 for the IP Notify (IP) and the Second IP Notify (IP2) action.
The IP Notify profiles are also used in Admin Menu > Time Tasks for automated
sending of network messages. For additional information on this topic, see section
7.9,
Time Tasks
.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
188/288
Software Camera Manual Part 2
Use the Test Current
Network Configuration
dialog to test the IP No-
tify profiles
Note
Open Admin Menu > Test Current Network Configuration to test the
IP Notify profiles one by one.
To Next Page
Loading...
