Profiles & Options
By factory default, this dialog contains several predefined time table profiles. Click
on the Add new time table button at the bottom of the dialog to create a new time
table profile. Enter a name for the time table profile in the corresponding text field.
Remember to enter a descriptive name for the time table profile as this name is
later displayed in other dialogs.
The lines of one time table profile constitute its time ranges:
• Active time range: The alarm symbol and the blue background color of a
line indicate that this time period is currently active.
• Switch status (On/Off): Setting this option to
On
will prompt the camera to
switch the status to
On
while the time range is active and to
Off
otherwise.
• Day/Custom Day Select the desired days of the week or one of the custom
days defined above.
• Start time: Set the start time (
hour
,
minute
) of the time range.
• End time: Set the end time (
hour
,
minute
) of the time range.
• Remove: Click on this button to remove the time range.
• Add: Click on this button to add a new time range.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
190/288
Software Camera Manual Part 2
You can define several
time tables for different
time ranges
Caution
A time table profile is not required to fully cover the desired time range,
without leaving any gaps. These gaps (undefined times) will always
assume the opposite state of the first time range:
• If the first time range has been set to
On
, all undefined times have
the status off.
• If the first time range has been set to
Off
, all undefined times have
the status on.
To Next Page
Loading...
