Motion Control Engineering Motion 4000 User Manual

User Interface
4-2 Manual # 42-02-2P24
• F2 — External Memory Mode:
• View data stored in external memory. See page 4-53.
• F3 — System Mode:
•Building security. See Building Security Menu on page 4-53.
• Controller system (fault bypass, data trap). See Controller System Menu on page 4-55.
• Passcode request (See Passcode Request Menu on page 4-56.)
• Load weigher thresholds (See Load Weigher Thresholds on page 4-57.)
• Analog load weigher learn
• Controller System Menu (real time speed/position Additional Car Options on page 4-
49)
• F4 — Messages and Floor Labels (F4: Messages and Floor Labels on page 4-60)
• F5 — Controller Utilities Menu: Front and rear car call entry, date/time settings, motion
diagnostics. (See F5 Menus on page 4-62.)
• Monitoring and Reporting (Please refer to “Monitoring and Reporting Menu” on
page 4-112).
• Learning Terminal switches (Please refer to “Terminal Switch Learn” on page 4-115).
• F6 — Hoistway learn operation (Please refer to “F6: Hoistway Learn Operations” on
page 4-117).
•Floors
• Counterweight position
• F7 — Parameters adjust (download). Please refer to “F7: Parameters Adjust” on page 4-
118.
• F8 — Software version (Please refer to “F8: Software Revision” on page 4-142.)
• F1 and F8 — Board software versions (Please refer to “F1 & F8: Board Software Versions”
on page 4-143.)

Motion Control Engineering Motion 4000 Specifications

General

Brand	Motion Control Engineering
Model	Motion 4000
Category	Controller
Language	English