Night Service
Aspila EX Software Manual Features 269
•12-01-02 : Night Mode Function Setup - Automatic Night Service Enabled
Enable (1) or disable (0) Automatic Night Service for the system. Make sure to set the Service
Patterns in 12-02, 12-03, and 12-04.
•12-01-03 : Night Mode Function Setup - Night Mode Switch Operating Mode
Set the function of the NTCPU Night Service Mode switch (Not Used = 0, Day 1 Mode = 1,
Night 1 Mode = 2, Midnight 1 Mode = 3, Rest 1 Mode = 4, Day 2 Mode = 5, Night 2 Mode =
6, Midnight 2 Mode = 7, Rest 2 Mode = 8).
•12-02-01 : Automatic Night Service Patterns
Configure the Automatic Night Service patterns. Pattern 1 should begin at 00:00 (midnight).
Make sure to include the mode information for each time period as the system assigns the Day
Mode (0) to all time periods not assigned to modes 1-3.
•12-03-01 : Weekly Night Service Switching
Assign one of the five Automatic Night Service patterns programmed in 12-02 to each day of the
week.
•12-04-01 : Holiday Night Service Switching
Assign on of the five Automatic Night Service patterns to holidays.
•12-05-01 : Night Mode Group Assignment for Extensions
Assign a Day/Night Mode Group (01-32) for each extension.
•12-06-01 : Night Mode Group Assignment for Trunks
Assign a Day/Night Mode Group (01-32) for each trunk port (1-200).
•12-07-01 : Text Data for Night Mode
Create an original text message which will be displayed on an LCD of system phone tele-
phone in each Night Mode.
•14-07-01 : Trunk Access Map Setup
To allow for UNA answering, set up the Trunk Access Maps (1-200). For UNA, extension
must have incoming access to trunk ringing the External Paging speakers.
•15-06-01 : Trunk Access Map for Extensions
For UNA answering, assign Trunk Access Maps (1-200) to extensions. Make one entry for
each Night Service mode.
•15-07-01 : Programmable Function Keys
Assign Night Service function keys (09) to extensions and set the key for the proper mode
(Day, Night, Rest, etc.). Assign trunks to function keys (code *01 + 001-200). If required,
define a function key for a system phone to use the general purpose relay (51).
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-07-01 : Class of Service Options (Administrator Level) - Manual Night Mode Switching
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to manually
switch the Night Mode (Service Code 818).
•22-04-01 : Incoming Extension Ring Group Assignment
To have trunks ring extension during the different Night Service modes (for ANA), assign
extensions to Ring Groups (1-100). For each extension in the Ring Group, indicate in Pro-
gram 22-06 if trunk should ring (1) or not ring (0).
•22-05-01 : Incoming Trunk Ring Group Assignment
To have trunks ring extensions for ANA, assign trunks to Ring Groups. You make a different
entry for each Night Service mode.
•22-08-01 : DIL/IRG No Answer Destination
If a Universal Answer call rings longer than the DIL No Answer Time (Program 22-01-04), it
routes to the Ring Group specified in this option (Ring Group (1-100), DSPDB Voice Mail
(101) or In-Skin Voice Mail (102)).
•31-05-01 : Universal Night Answer
For each Night Service Mode, assign which trunks should ring which External Paging Zones.
To Next Page
Loading...
