Charts and Illustrations
Aspila EX Software Manual Features 35
Code: 32
Operation: Set up
trunk call + Press
key OR
Press key
Conference, Voice Call
OR
Meet Me Conference
(Also see Conference)
Setting up a Voice Call
Conference
OR
Joining a Meet Me
Conference
None 863, 864, or
865
Code: 33
Operation: Call
ext. and receive
busy + Press key
Off Hook Signaling Signaling a busy extension None 809
Code: 34
Operation: Call ext
+ Press key
Barge In Barging In on a co-worker’s
conversation
None 810
Code: 35
Operation: Call
busy extension or
access busy trunk +
Press key
Callback / Camp On /
Trunk Queuing
Leaving a Callback request at
a busy extension, Camping
On to a busy extension,
Queuing for a busy trunk
On red when
activated
850
Code: 36
Operation: Dial
busy ext + Press key
Department Step Calling Step Calling through a
Department Group for an idle
member
None 808
Code: 37
Operation: Call
extension + Press
key
Call Forwarding / Do Not
Disturb Override
Overriding an extension’s
Call Forwarding or Do Not
Disturb
On red when
activated
807
Code: 38
Operation: Leave
message: Call ext +
Press key OR
Answer message:
Press key
Message Waiting Answering/Leaving a
Message Waiting
None 841
Code: 39
Operation: Press
key at destination
and source + ext
Room Monitor Activating Room Monitor Fast Flash red at
destination, Hold
Flash red at source
-
Code: 40
Operation: Press
key
Handset Cutoff Cutting off the handset trans-
mission while on a call
On when feature
active (no transmis-
sion on handset)
-
Table 5: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you are... Key Lamp Status
Also see
Srvc Code
To Next Page
Loading...
