NEC ASPILA EX - Page 50

Charts and Illustrations
36 Features Aspila EX Software Manual
Code: 41 + sec. ext.
Operation: Press
key
Secretary Call Calling your secretary (using
the buzzer)
On red at source
Fast Flash red at
destination
-
Code: 42 + boss ext.
Operation: Press
key
A secretary picking up a call
ringing your boss’s exten-
sion.
On red when
activated
-
Code: 43
Operation: TRK
call + Hold + ext +
Press key
Serial Call Placing a Serial Call to a
co-worker
None -
Code: 44
Operation: Place or
answer call + Press
key
Hold Putting a call on System Hold
(if hold key is reassigned)
None -
Code: 45
Operation: Place or
answer call + Press
key
Putting a call on Exclusive
Hold
None -
Code: 46
Operation: Press
key
Department Calling Logging in or logging out of
your Department Calling
Group
On when removed,
Off when installed
750
Code: 47 + dest. ext.
Operation: Press
and hold key
Reverse Voice Over Initiating Reverse Voice Over Full BLF red -
Code: 48
Operation: Hear
Off-Hook Signaling
tones + Press key
Voice Over Initiating or responding to
Voice Over
On red when
responding Hold
Flash red when
listening
890
Code: 49 + ext or
voice mail number
Operation: Press
key
Call Redirect Redirecting an incoming call
to an extension or voice mail
On red when
activated
Flashes when in
DND/Call Forward
-
Code: 50
Operation: Press
key
Account Codes Entering Account Codes None * or 891
Code: 51 + relay
number
Operation: Press
key
General Purpose Relay Activating the general pur-
pose relay
On when activd 880
Table 5: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you are... Key Lamp Status
Also see
Srvc Code