Charts and Illustrations
Aspila EX Software Manual Features 37
Code: 54
Operation: Press
key
Call Forward, Off-
Premise
Forwarding a Door Box call
to an external phone number
On red when
activated
822
Code: 55
Operation: Do not
lift handset + Press
key + Enter exten-
sion number + Enter
name + Press HOLD
Name Storing Changing the name dis-
played on your display phone
None 800
Code: 66
Operation: Press
key + ext or outside
number
Data Communications Setting up a Data Call On red when call set
up
-
Code: 67 + ext or
Message Center
number
Operation: Press
key
Voice Mail Calling Voice Mail or
leaving a message
Flashes green on
your key for your
messages or red for
the Message Center
717
Code: 68 + 0-2
Operation: Press
key
Using Voice Mail Service Flashes slowly when
monitoring
Code: 69 + 0
Operation: Set up
call + Press key
Using Voice Mail Record Slow Flash red when
active
-
Code: *01 + Trunk
number (001-200)
Operation: Press
key
Central Office Calls Pressing a line key to place or
answer a trunk call (where
trunks are 001-200)
On green when
seized, on red when
in use (by other
party), Slow Flash
green when ringing,
Hold flash when on
Hold
805
Code: *02 + Trk
group (1-9 or 001-
200)
Operation: Press
key
Trunk Groups Using a trunk group key to
access a Trunk Group
On red when active 804
Code: *03 + ext. or
department group
Operation: Press
key
Multiple Directory
Numbers/Call Coverage
Multiple Directory Number:
Placing or answering a call
from your virtual (phantom)
extension or Call Coverage:
Placing or answering a call to
your co-worker’s extension
Slow Flash red when
ringing, On red
when busy
-
Table 5: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you are... Key Lamp Status
Also see
Srvc Code